Doç. Dr. EMRE ESENER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Evaluating The Characteristics of Thin-Walled S235 Steel Under Three-Point Bending with Different Loading Parameters

ÜNLÜ A., ESENER E.

Experimental Techniques , cilt.47, sa.6, ss.1275-1283, 2023 (SCI-Expanded)

Earing prediction of 2090-T3 aluminum-cups using a complete homogenous fourth-order polynomial yield function

Firat M., ŞENER B., Akşen T. A., ESENER E.

Materialpruefung/Materials Testing , cilt.64, sa.10, ss.1480-1494, 2022 (SCI-Expanded)

On the prediction of strength and deformation anisotropy of automotive sheets for stamping formability analysis

ESENER E., Akşen T. A., Ünlü A., Firat M.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.43, sa.12, 2021 (SCI-Expanded)

Accurate localization technique for stamping sheet metal parts with complex surfaces

ESENER E.

Indian Journal of Engineering and Materials Sciences , cilt.28, sa.4, ss.409-419, 2021 (SCI-Expanded)

DETERMINING THE BENDING BEHAVIOR OF ST-37 RECTANGULAR TUBES WITH FINITE ELEMENT VALIDATION

ESENER E.

Journal of Mechanics of Materials and Structures , cilt.16, sa.5, ss.611-624, 2021 (SCI-Expanded)

Determining springback behavior of high-strength steels via channel forming process

ESENER E., SÖNMEZ E., Özsoy M., Firat M.

Acta Physica Polonica A , cilt.132, sa.3, ss.1010-1012, 2017 (SCI-Expanded)

Determination of the fatigue behavior of a wheel rim using finite element analysis

ESENER E., Ercan S., Firat M.

Acta Physica Polonica A , cilt.132, sa.3, ss.617-619, 2017 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Analytical evaluation of plasticity models for anisotropic materials with experimental validation

ESENER E., Ünlüb A.

Research on Engineering Structures and Materials , cilt.8, sa.1, ss.75-89, 2022 (Scopus)

On the effect of numerical parameters in finite element through thickness modeling for springback prediction

ŞENER B., AKŞEN T. A., ESENER E., FIRAT M.

Research on Engineering Structures and Materials , cilt.8, sa.4, ss.799-809, 2022 (Hakemli Dergi)

Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading

KARAHAN O. C., ESENER E.

International Journal of Automotive Science and Technology , cilt.5, sa.1, ss.58-62, 2021 (Hakemli Dergi)

Modeling plastic anisotropy evolution of AISI 304 steel sheets by a polynomial yield function

ŞENER B., ESENER E., Firat M.

SN Applied Sciences , cilt.3, sa.2, 2021 (ESCI)

Evaluation of Plasticity Models Using Uniaxial Tensile Test

ÜNLÜ A., ESENER E., FIRAT M.

European Mechanical Science , cilt.4, sa.3, ss.116-122, 2020 (Hakemli Dergi)

Plastisite Modellerinde Pekleşme Etkisinin Sonlu Elemanlar Analizi İle Tespiti

ESENER E.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.11, sa.1, ss.171-181, 2020 (Hakemli Dergi)

Predictive modelling of Trip600 steel formability performance using analytical and numerical methods

Kumlu C., ESENER E., Firat M.

Engineering Research Express , cilt.1, sa.2, 2019 (Scopus)

Investigation of Notch Root Strain Behaviors Under Combined Loadings

AKŞEN T. A., ESENER E., FIRAT M.

European Journal of Engineering and Natural Science , cilt.3, sa.1, ss.42-51, 2019 (Hakemli Dergi)

Malzeme Modellerinin Sac Metal Sonlu Elemanlar Analizi Tahmin Performansına Etkisinin Değerlendirilmesi

Özlem K. G., ESENER E.

Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.6, sa.1, ss.1-11, 2019 (Hakemli Dergi)

Sonlu Elemanlar Hesaplama Parametrelerinin Sac Metal Şekillendirme Simülasyon Süresi ve Hassasiyetine Etkisinin Tespiti

VATANSEVER H., ESENER E.

Avrupa Bilim ve Teknoloji Dergisi , cilt.0, sa.16, ss.92-108, 2019 (Hakemli Dergi)

Metal Şekillendirme Proseslerinde Sac Açınım Geometrisinin Sonlu Elemanlar Yöntemi ile Geliştirilmesi

ESENER E., SÖNMEZ E., FIRAT M.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.6, ss.79-89, 2018 (Hakemli Dergi)

Gaz Altı Ark Kaynağı İşleminde Proses Parametrelerinin Etkisinin İncelenmesi

EROL R., ESENER E.

Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.4, sa.1, ss.30-35, 2017 (Hakemli Dergi)

Springback Predictions of a Dual-phase Steel Considering Elasticity Evolution in Stamping Process

Ozsoy M., ESENER E., Ercan S., Firat M.

Arabian Journal for Science and Engineering , cilt.39, sa.4, ss.3199-3207, 2014 (Scopus) Sürdürülebilir Kalkınma

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Predictive Modeling Based on Angular Variations of Yield Stress Ratios and Lankford Parameters for DP800 Steel

ÜNLÜ A., AKŞEN T. A., ESENER E., FIRAT M.

10th International Automotive Technologies Congress, Bursa, Türkiye, 06 Eylül 2021

Prediction of Earing Profile In Cup Drawing Test Using Hill48 Criterion

AKŞEN T. A., ŞENER B., ESENER E., FIRAT M.

10th International Automotive Technologies Congress, Bursa, Türkiye, 06 Eylül 2021

Edge thinning prediction of a hole under stretching

AKŞEN T. A., ŞENER B., ESENER E., FIRAT M.

5th International Iron&Steel Symposium, Karabük, Türkiye, 01 Nisan 2021

Development of a 3-D die surface compensation method based on part springback distribution

ESENER E., ŞENER B., FIRAT M.

5th International Iron&Steel Symposium, Karabük, Türkiye, 01 Nisan 2021

A Numerical Investigation on Hole Expansion Behavior of Bake Hardenable Steels

ŞAHİN E. N., ÇİNİ Y., ESENER E., FIRAT M.

5th International Iron&Steel Symposium, Karabük, Türkiye, 01 Nisan 2021

Finite Element Modeling of Stretch Drawing Process Using Bake Hardenable Steels

ÜNLÜ A., KAP E., ESENER E., FIRAT M.

5th International Iron&Steel Symposium, Karabük, Türkiye, 01 Nisan 2021

Failure Prediction in Hole Expansion Test Using Plastic Work Criterion

Aksen T. A., ŞENER B., ESENER E., Firat M.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2021, Ankara, Türkiye, 18 - 20 Ağustos 2021, cilt.35, ss.82-90

EARING PREDICTION OF A CUP DRAWING PROCESS BASED ON THE QUADRATIC HILL YIELD FUNCTION

AKŞEN T. A., ŞENER B., ESENER E., FIRAT M.

3rd International Conference on Engineering Technology and Innovation, Belgrade, Sırbistan, 17 - 21 Nisan 2019, cilt.1, ss.30-38

ŞEKİLLENDİRME SINIR EĞRİSİNİN TEORİK MODEL İLE TAHMİN PERFORMANSININ DEĞERLENDİRİLMESİ

Kumlu C., ESENER E., FIRAT M.

International 9th Automotive Technologies Congress, 7 - 08 Mayıs 2018