Influence of aluminum content on machinability of AS series cast magnesium alloys

---

Atıf İçin Kopyala

AKYÜZ B.

Transactions of Nonferrous Metals Society of China (English Edition), cilt.24, sa.11, ss.3452-3458, 2014 (SCI-Expanded)

• Yayın Türü: Makale / Tam Makale
• Cilt numarası: 24 Sayı: 11
• Basım Tarihi: 2014
• Doi Numarası: 10.1016/s1003-6326(14)63488-9
• Dergi Adı: Transactions of Nonferrous Metals Society of China (English Edition)
• Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
• Sayfa Sayıları: ss.3452-3458
• Anahtar Kelimeler: AS series alloys, cutting force, flank build-up (FBU), machinability, Mg alloy
• Bilecik Şeyh Edebali Üniversitesi Adresli: Evet

Özet

© 2014 The Nonferrous Metals Society of China.Abstract The influence of Al content on machinability of AS series cast Mg alloys was studied. The assessment of machinability of Mg alloys was performed by measuring the cutting forces and surface roughness. The microstructure and the tensile properties were also studied. The results reveal that cutting forces are increased with the increase of the Al content. Surface roughness and mechanical properties are the highest for AS91 Mg alloy. It is assumed that the main mechanism, which has an influence on the mechanical properties, is the presence of intermetallic phases (Mg2Si and Mg17Al12). Cutting forces increase with the increase of the cutting speed in machining of all Mg alloys. These measured data are in accordance with the mechanical properties of the machined alloys.