Effect of 2-hydroxyethyl methacrylate content on the emulsion polymerization process of styrene–butyl acrylate–acrylic acid: Chemical, thermal and film properties of polymer latex


EREN B., Çınar H., Erdoğan B.

Journal of Thermal Analysis and Calorimetry, cilt.147, sa.23, ss.13289-13299, 2022 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 147 Sayı: 23
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1007/s10973-022-11559-2
  • Dergi Adı: Journal of Thermal Analysis and Calorimetry
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.13289-13299
  • Anahtar Kelimeler: Functional hydroxyl, HEMA, Polymer latex, Seeded polymerization, Styrene acrylate copolymer
  • Bilecik Şeyh Edebali Üniversitesi Adresli: Evet

Özet

In this study, a series of hydroxyl functionalized styrene acrylate latex particles were prepared using the 2-hydroxyethyl methacrylate (HEMA) monomer as a hydroxyl source via the seeded emulsion polymerization method. The effect of anionic/nonionic surfactant on the morphology and thermal behaviors of the prepared polymer latex particle was studied. The structure and morphology of polymer latex particles were characterized using FT-IR, 1H-NMR, DSC, TGA, DLS, and SEM techniques. The water-soluble HEMA monomer led to homogeneous nucleation, in addition to micellar nucleation observed due to the water-insoluble styrene and butyl acrylate monomers. The unmodified polymer latex particle had a glass transition temperature (Tg) of 7.5 °C. The Tg of hydroxyl functionalized polymer latex particle had 13.9, 14.8, 19.0, and 18.8 °C in the presence of 2.5, 4.0, 6.0, and 10.0 mass % HEMA, respectively. The average particle size was 95.30, 98.30, 115.90, 167.00, and 153.50 nm at the polymer latex content of 0, 2.5, 4.0, 6.0, and 10.0 mass % HEMA, respectively. With the addition of 1.35 mass % NP-40, the particle size of polymer latex increased from 167.00 to 218.50 nm in the presence of 0.9 mass % SLS. The addition of nonionic surfactant NP-40 affected the microstructure of polymer latex film and, consequently, its thermal characteristics.