Journal of the Energy Institute, vol.111, 2023 (SCI-Expanded)
In this study, effect of pre-treatments on biomass pyrolysis kinetics was evaluated. Fir wood sawdust (F), pine wood sawdust (P) and hazelnut shell (H) were selected as raw biomass sample. Acidic pre-treatment was applied by using 1M-H2SO4 at room conditions and hydrothermal pre-treatment applied by using high pressure and temperature reactor. Thermogravimetric analysis was executed to specify thermal degradation behavior of the samples. Thermogravimetric analysis was also used to determine kinetic parameters of thermal degradation for biomass and pre-treated biomass samples. Having knowledge thermal degradation behavior and kinetic parameters of pyrolysis process such as activation energy and reaction rate are very important for reactor design. Kissinger-Akahira-Sunose (KAS), Ozawa-Flynn-Wall (OFW) and Coats-Redfern (CR) methods were used to investigate the effect of different pre-treatment techniques on the kinetic parameters. Activation energies of pyrolysis reactions for F, P and H were found as 158.47 ± 1.08 kJ/mol, 126.0 ± 1.78 kJ/mol and 158.66 ± 1.24 kJ/mol, respectively. The calculated activation energy values increased while acidic and hydrothermal pre-treatment were applied to each biomass samples. In conclusion, acidic and hydrothermal pre-treatments influenced the serial and parallel reaction rates during the thermal degradation process and the calculated activation energy values changed accordingly. Inorganics that catalyzed the pyrolysis reactions were removed by acid pre-treatment. The condensed species during hydrothermal pre-treatment prevented the easy volatilization. As a result of experimental studies and kinetic calculations, it has been determined that pre-treatments applied to biomass increased the activation energy value in thermal degradation reactions.