Reciprocal sliding wear behaviour of B4C particulate reinforced aluminum alloy composites


MİNDİVAN H.

Materials Letters, vol.64, no.3, pp.405-407, 2010 (SCI-Expanded) identifier

  • Publication Type: Article / Article
  • Volume: 64 Issue: 3
  • Publication Date: 2010
  • Doi Number: 10.1016/j.matlet.2009.11.032
  • Journal Name: Materials Letters
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.405-407
  • Keywords: Aluminum, Composite materials, Mechanical properties, Wear
  • Bilecik Şeyh Edebali University Affiliated: No

Abstract

Aluminum based composites reinforced with B4C particles were prepared by cryomilling and subsequent hot pressing steps. The cryomilled powders dispersed with 5 wt.% or 10 wt.% B4C particles were hot pressed under a pressure of 600 MPa at 350 °C. Microstructural studies conducted on the composites indicated that homogeneous distribution of the B4C particles in the Al matrix and a good interface between them had been achieved. According to the results of reciprocating wear tests carried out by utilizing alumina and steel balls, wear resistance increased with increasing B4C particle content. © 2009 Elsevier B.V. All rights reserved.