Öğr. Gör. Dr. ÖZHAN KITAY

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 6

1. Machining and deformation response of wrought and additively manufactured 316L stainless steel under cryogenic cooling and dry condition

KITAY Ö., KAYNAK Y.

International Journal of Advanced Manufacturing Technology , cilt.137, sa.3, ss.1791-1809, 2025 (SCI-Expanded)

2. Analysis of cutting tool geometry induced machining response, surface integrity and anisotropy relation of additively manufactured 316L stainless steel

KITAY Ö., KAYNAK Y.

Journal of Manufacturing Processes , cilt.120, ss.719-732, 2024 (SCI-Expanded)

3. Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing

Taşcıoğlu E., KITAY Ö., Keskin A. Ö., KAYNAK Y.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.44, sa.4, 2022 (SCI-Expanded)

4. The Effect of Flood, High-Pressure Cooling, and CO2-Assisted Cryogenic Machining on Microhardness, Microstructure, and X-ray Diffraction Patterns of NiTi Shape Memory Alloy

KITAY Ö., KAYNAK Y.

Journal of Materials Engineering and Performance , cilt.30, sa.8, ss.5799-5810, 2021 (SCI-Expanded)

5. Influence of the post-processing operations on surface integrity of metal components produced by laser powder bed fusion additive manufacturing: a review

Khan H. M., KARABULUT Y., KITAY Ö., KAYNAK Y., Jawahir I.

Machining Science and Technology , cilt.25, sa.1, ss.118-176, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

6. The effect of post-processing operations on surface characteristics of 316L stainless steel produced by selective laser melting

KAYNAK Y., Kitay Ö.

Additive Manufacturing , cilt.26, ss.84-93, 2019 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 3

1. Kesici Takım Geometrisinin CW511L Kurşunsuz Pirinç Malzemenin İşlenebilirliğine Etkisinin İncelenmesi

Taşcıoğlu E., KAYNAK Y., KITAY Ö.

Makina Tasarım ve Imalat Dergisi , ss.59-65, 2025 (Hakemli Dergi)

2. A review of mechanical mass finishing methods in post-processing applications of additively manufactured parts

KITAY Ö., KAYNAK Y.

International Journal of Rapid Manufacturing , cilt.10, sa.2, ss.183-199, 2025 (Hakemli Dergi)

3. Porosity, Surface Quality, Microhardness and Microstructure of Selective Laser Melted 316L Stainless Steel Resulting from Finish Machining

KAYNAK Y., KITAY Ö.

Journal of Manufacturing and Materials Processing , cilt.2, sa.2, ss.36, 2018 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 17

1. Effect of Drilling Processon the Hole Quality ofAdditively ManufacturedInconel 718 Alloy

KITAY Ö., KAYNAK Y.

5th AMCTURKEY Additive Manufacturing Conference, Antalya, Türkiye, 28 - 30 Nisan 2025, (Özet Bildiri)

2. Comparison of Experimental and Finite Element Simulation Studies on Machinability of Additively Manufactured and Wrought 316L Stainless Steel

KITAY Ö., KAYNAK Y.

5th AMCTURKEY Additive Manufacturing Conference, Antalya, Türkiye, 28 - 30 Nisan 2025, (Özet Bildiri)

3. Numerical Simulation of Cutting-Induced Grain Refinement in Machining Process under Dry and MQL Conditions of Titanium Ti-5553 Alloy

KAYNAK Y., Ozkutuk M., KITAY Ö.

20th CIRP Conference on Modeling of Machining Operations in Mons, CIRP CMMO 2025, Mons, Belçika, 22 - 23 Mayıs 2025, cilt.133, ss.716-721, (Tam Metin Bildiri)

4. Enhanced drilling process to improve hole quality of additively manufactured Inconel 718 Alloy

KITAY Ö., KAYNAK Y., Khan A. M.

28th International ESAFORM Conference on Material Forming, ESAFORM 2025, Paestum, İtalya, 7 - 09 Mayıs 2025, cilt.54, ss.228-237, (Tam Metin Bildiri)

5. Kesici Takım Geometrisinin CW511L Kurşunsuz Pirinç Malzemenin İşlenebilirliğine Etkisinin İncelenmesi

Taşcıoğlu E., KAYNAK Y., KITAY Ö.

12th International Congress on Machining(UTIS), Antalya, Türkiye, 1 - 03 Kasım 2024, ss.655-665, (Tam Metin Bildiri)

6. Experimental and Finite Element Simulation Studies of Chip Formation in Orthogonal Cutting Lead-Free Brass

Taşcıoğlu E., KAYNAK Y., KARABULUT Y., KITAY Ö.

12th International Congress on Machining(UTIS), Antalya, Türkiye, 1 - 03 Kasım 2024, ss.624-639, (Tam Metin Bildiri)

7. Effect of Sustainable Hybrid Coolant Strategy on Machinability and Energy Consumption of NiTiHf High Temperature Shape Memory Alloy

KITAY Ö., Taşcıoğlu E., KAYNAK Y.

20th Global Conference on Sustainable Manufacturing, Vietnam, 10 - 12 Ekim 2024, (Tam Metin Bildiri)

8. Innovative cryogenic processing for enhanced surface integrity characteristics of stainless steels

KITAY Ö., KAYNAK Y.

Material Forming - ESAFORM 2024, Toulouse, Fransa, 24 - 26 Nisan 2024, (Tam Metin Bildiri)

9. Optimization of Process Parameters and Mechanical Property Analysis of PLA Parts Manufactured by FDM Using A Grey Relational Analysis

KITAY Ö., ALACA Ö.

7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, (Özet Bildiri)

10. Effect of Heat Treatments on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion Method

KITAY Ö., KAYA M., KAYNAK Y.

3rd AMCTURKEY Additive Manufacturing Conference, Aydın, Türkiye, 6 - 08 Ekim 2022, ss.63-64, (Özet Bildiri)

11. Analytical and Experimental Analysis of the Effect of Processing Time on Surface Quality Improvement of Machined Manufacturing Steel Parts in Circular Vibration Machine

Gharibi A., YALÇINKAYA S., KITAY Ö.

5. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, İstanbul, Türkiye, 21 - 22 Aralık 2019, cilt.5, ss.608-616, (Tam Metin Bildiri)

12. Konik Kilit Sistemleri Çalışma Mantığı ve Başarım Değerlerine Etki Eden Faktörlerin İncelenmesi

KITAY Ö., YALÇINKAYA S., Gharibi A.

5. Uluslararası Mühendislik Mimarlık Tasarım Kongresi, İstanbul, Türkiye, 21 - 22 Aralık 2019, cilt.5, ss.617-625, (Tam Metin Bildiri)

13. Farklı Soğutucuların Inconel 718 Alaşımının İşlenebilme Performansına Etkisinin Araştırılması

KITAY Ö., Bozkurt C. A., KAYNAK Y.

9. Uluslararası Talaşlı İmalat Sempozyumu (UTİS), Antalya, Türkiye, 8 - 10 Kasım 2018

14. Şekil Hafızalı NiTi Alaşımın Kuru, MQL ve Kriyojenik Koşullarda İşlenmesinde Kesici Takım Aşınmasıyla İş Parçası Yüzey Kalitesi Arasındaki İlişkinin Araştırılması

KITAY Ö., KAYNAK Y.

18. Uluslararası Makina Tasarım ve İmalat Kongresi, Eskişehir, Türkiye, 3 - 06 Temmuz 2018 Sürdürülebilir Kalkınma

Kitaplar 1

1. İkincil İşlemler ve Kalite Kontrol

KAYNAK Y., KITAY Ö., ERTUĞRUL O.

Tasarım Felsefesini Değiştiren Yeni Bir İmalat Anlayışı - EKLEMELİ İMALAT, , Editör, Nobel Akademik Yayıncılık, ss.381-439, 2024

Öğr. Gör. Dr. ÖZHAN KITAY

Yayınlar & Eserler

1. Machining and deformation response of wrought and additively manufactured 316L stainless steel under cryogenic cooling and dry condition

2. Analysis of cutting tool geometry induced machining response, surface integrity and anisotropy relation of additively manufactured 316L stainless steel

3. Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing

4. The Effect of Flood, High-Pressure Cooling, and CO2-Assisted Cryogenic Machining on Microhardness, Microstructure, and X-ray Diffraction Patterns of NiTi Shape Memory Alloy

5. Influence of the post-processing operations on surface integrity of metal components produced by laser powder bed fusion additive manufacturing: a review

6. The effect of post-processing operations on surface characteristics of 316L stainless steel produced by selective laser melting

1. Kesici Takım Geometrisinin CW511L Kurşunsuz Pirinç Malzemenin İşlenebilirliğine Etkisinin İncelenmesi

2. A review of mechanical mass finishing methods in post-processing applications of additively manufactured parts

3. Porosity, Surface Quality, Microhardness and Microstructure of Selective Laser Melted 316L Stainless Steel Resulting from Finish Machining

1. Effect of Drilling Processon the Hole Quality ofAdditively ManufacturedInconel 718 Alloy

2. Comparison of Experimental and Finite Element Simulation Studies on Machinability of Additively Manufactured and Wrought 316L Stainless Steel

3. Numerical Simulation of Cutting-Induced Grain Refinement in Machining Process under Dry and MQL Conditions of Titanium Ti-5553 Alloy

4. Enhanced drilling process to improve hole quality of additively manufactured Inconel 718 Alloy

5. Kesici Takım Geometrisinin CW511L Kurşunsuz Pirinç Malzemenin İşlenebilirliğine Etkisinin İncelenmesi

6. Experimental and Finite Element Simulation Studies of Chip Formation in Orthogonal Cutting Lead-Free Brass

7. Effect of Sustainable Hybrid Coolant Strategy on Machinability and Energy Consumption of NiTiHf High Temperature Shape Memory Alloy

8. Innovative cryogenic processing for enhanced surface integrity characteristics of stainless steels

9. Optimization of Process Parameters and Mechanical Property Analysis of PLA Parts Manufactured by FDM Using A Grey Relational Analysis

10. Effect of Heat Treatments on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion Method

11. Analytical and Experimental Analysis of the Effect of Processing Time on Surface Quality Improvement of Machined Manufacturing Steel Parts in Circular Vibration Machine

12. Konik Kilit Sistemleri Çalışma Mantığı ve Başarım Değerlerine Etki Eden Faktörlerin İncelenmesi

13. Farklı Soğutucuların Inconel 718 Alaşımının İşlenebilme Performansına Etkisinin Araştırılması

14. Şekil Hafızalı NiTi Alaşımın Kuru, MQL ve Kriyojenik Koşullarda İşlenmesinde Kesici Takım Aşınmasıyla İş Parçası Yüzey Kalitesi Arasındaki İlişkinin Araştırılması

15. Seçici Lazerle Ergitme Yöntemi İle Üretilen Inconel 625 Alaşımlı Parçada Yüzey Bütünlüğünün İncelenmesi

16. 316LVM Paslanmaz Çelik Malzemesinin Talaşlı İmalat Ve Yüzey Bütünlüğü Analizi

17. P20 Takım Çeliğinin Karbondioksit Yardımlı Talaşlı İmalat Performansının Değerlendirilmesi

1. İkincil İşlemler ve Kalite Kontrol